Colloidal copper generator copper GZK-2 72V 6mA
Promotional offer on microprocessor generator for colloidal gold, copper, and zinc GZK-2 (72V, approx. 6mA, version for 4 electrodes).
Technical specifications
- Condition
- New
- Invoice
- VAT invoice issued
- Model
- GZK-2
- Manufacturer
- Nowoster
Product description
Promotional offer on microprocessor generator for colloidal gold, copper, and zinc GZK-2 (72V, approx. 6mA, version for 4 electrodes). High quality colloidal gold production. Slow process, but high quality colloidal gold produced.
Included in the set:
- GZK-2 generator
- 9V or 12V power supply
- Banana plugs 4 pcs
To produce high-quality colloidal gold, copper, and zinc it is best to:
- Use gold wires of minimum 999 fineness. Wires must be purchased separately.
- Ultra-pure distilled or demineralized water with a maximum foreign ion content of 2ppm must be used to produce colloidal gold. Tap water, mineral water, etc. must not be used. Good water includes, among others, Kamix distilled water and Orlen Aqua Tech demineralized water (available at Orlen petrol stations).
- Use glass or ceramic vessels preferably. Metal vessels must not be used.
- Electrodes must not touch the bottom or walls of the vessel. The vessel must be clean.
- A TDS meter is best for checking water purity and final concentration. TDS meter must be purchased separately.
- A stirrer may be used for gold. A magnetic stirrer is recommended.
- It is recommended to clean electrodes of deposits (dark gray deposit) once daily with a kitchen towel, tissue, cotton cloth, etc.
- Production should be carried out in a dark place at room temperature. Heating during the process and/or stirring is permitted. Must not be in a sunlit room.
- Every few liters it is recommended to polish gold wires with fine sandpaper to a shine
- Store colloidal gold in a dark glass container in a dark place at room temperature.
- Gold production time depends on water volume, purity, temperature, and stirring, and is approx. 1-3ppm per day. A maximum of 5-6ppm is recommended. It is best to check the typically metallic colloidal fraction with a laser pointer (Tyndall effect).
Main features of the generator Current limit - approx. 6mA Maximum output voltage - 72V Electrode spacing - approx. 5cm Electrode polarity reversal Automatic voltage reduction on electrodes when current is limited Generator designed for gold electrodes from 1 to 2.5mm diameter and from 10 to 15cm length Typically the generator can produce up to approx. 10ppm (recommended up to 5-6ppm). Production rate is approx. 1-3ppm per day. Recommended for up to 200ml of water. Description of GZK-2 colloidal generator power supply in the range 9-12V DC. 9V or 12V power supply included in the set. current draw approx. 120mA. Power consumption approx. 1.5W. short-circuit protection for electrodes overload protection fully electronic polarity reversal. Reversal time set with knob (rightmost position approx. 1s, leftmost approx. 60s, middle position approx. 30s - optimal) dimensions in housing 9.5cm by 5cm. Height 4cm. Colloidal gold, copper, and zinc production Pour approx. 200ml of ultra-pure water into a clean dry vessel. Place the generator on the vessel so that the electrodes are as fully immersed as possible. Do not submerge the plugs. Connect the power supply to the mains. Production may take even several days. During the process the LED flashes. Once a day check with a TDS meter whether the concentration is rising and/or check the Tyndall effect with a laser pointer. During production it is recommended to clean the electrodes. Every few liters it is recommended to polish electrodes with fine sandpaper to a shine.