Frequently asked questions

Answers to the most common questions about colloidal silver generators and home nanosilver production.

What purity of silver wire should I use?

For high-quality colloidal silver, use silver wires of at least 999 purity.

What water should I use?

Use ultra-pure distilled or demineralized water with no more than 2 ppm of foreign ions. Do not use tap or mineral water.

What containers are suitable?

Glass or ceramic vessels work best. Never use metal containers.

How should I position the electrodes?

Electrodes must not touch the bottom or walls of the vessel. The vessel must be clean, and the electrodes should be submerged as much as possible.

How do I monitor the concentration?

A TDS meter is the best way to check water purity and final concentration. It must be purchased separately.

Can I stir the colloid during production?

No — do not mechanically stir the colloid while the generator is running. Let the process complete without interference.

How do I maintain the electrodes during production?

Clean grey deposits from the electrodes every 2–3 hours with a paper towel or cloth. Every dozen liters or so, polish the wires with fine sandpaper.

Under what conditions should I produce colloidal silver?

Produce in a dark place at room temperature. Do not use a sunlit room. Gentle heating during the process is acceptable.

How should I store finished colloidal silver?

Store colloidal silver in a dark glass container, in a dark place, at room temperature.

Are GSK generators suitable for beginners?

Yes. GSK generators automate the process — they limit current, reverse electrode polarity, and signal when production is complete. Just prepare water, electrodes, and a vessel according to the guidelines above.